Cisco Cisco IOS Software Release 12.4(15)T

© 2007 Cisco Systems, Inc. All rights reserved.

Prior to Cisco IOS Release 12.4(15)T, one ATM PVC supported one PPPoE client. With the introduction 
of the Multiple PPPoE Client feature in Cisco IOS Release 12.4(15)T, one ATM PVC supports multiple 
PPPoE clients, allowing second line connection and redundancy. Multiple PPPoE clients can run 
concurrently on different PVCs, but each PPPoE client must use a separate dialer interface and a separate 
dialer pool. 

Configuration information is included in the “PPP Over Ethernet Client” module of the

, Release 12.4T.

The following sections provide information about this feature:

Restrictions for PPPoE Client 

PPPoE Client Support on ATM PVCs and Ethernet Interfaces 

Configuring a PPPoE Client on an ATM PVC

PPPoE Client in Cisco IOS Release 12.2(13)T and Later Releases: Examples

For a complete list of features included in the “PPPover Ethernet Client” module, see the Feature 
Information table located toward the end of the module.

The following commands are new or modified for this feature:

Detailed information about these commands is included in the

 Cisco IOS Broadband Access Aggregation 

.