Cisco Cisco IOS Software Release 12.4(15)T
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
HTTP TACAC+ Accounting Support
The HTTP TACAC+ Accounting Support feature adds the ability to log accounting records for HTTP
transfers to the Cisco IOS HTTP(S) 1.1 server.
transfers to the Cisco IOS HTTP(S) 1.1 server.
Network administrators track network changes by configuring an accounting mechanism. This is
accomplished by installing an accounting server on the network and configuring each device connected
to the network to log the state changes (or events) it experiences to this accounting server. State changes
occur for several reasons such as the following:
accomplished by installing an accounting server on the network and configuring each device connected
to the network to log the state changes (or events) it experiences to this accounting server. State changes
occur for several reasons such as the following:
•
Administrator configuring the device
•
Remote users configuring the device
•
Local users configuring the device
Each such event is framed as an accounting record, which is sent to the accounting server.
The HTTP TACAC+ Accounting Support feature adds the capability to generate and log accounting records for
these HTTP requested configuration changes.
these HTTP requested configuration changes.
Configuration Information
Configuration information is included in the “HTTP 1.1 Web Server and Client” module under the
“Configuring HTTP Services” section of the
“Configuring HTTP Services” section of the
,
Release 12.4T,
at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hnm_c/ch25/hhttp1s.htm
The following sections provide information about this feature:
•
How to Configure the HTTP 1.1 Web Server
•
Configuration Examples for the HTTP 1.1 Web Server
For a complete list of features included in the “HTTP 1.1 Web Server and Client” module, see the Feature
Information table located toward the end of the module.
Information table located toward the end of the module.