Cisco Cisco IOS Software Release 12.2(13)ZF 릴리즈 노트

The following is the output for the sh arp command on R1

R1#sh arp

Protocol  Address          Age (min)  Hardware Addr   Type   Interface

Internet  10.0.0.3                0   0004.dd0c.ffcb  ARPA   Ethernet0

1

Internet  10.0.0.1                -   0004.dd0c.ff86  ARPA   Ethernet0 

The following is the output for the sh arp command on R2

R2#sh arp

Protocol  Address          Age (min)  Hardware Addr   Type   Interface

Internet  10.0.0.3                -   0004.dd0c.ffcb  ARPA   Ethernet0/0

2

Internet  10.0.0.1                0   0004.dd0c.ff86  ARPA   Ethernet0/0

For information regarding the features supported in Cisco IOS Release 12.2 T, refer to the 
Cross-Platform Release Notes and New Feature Documentation links at the following location on 
Cisco.com:

This URL is subject to change without notice. If it changes, point your web browser to Cisco.com, and 
click the following path:

:

 Technical Documents

:

:

 Release 12.2

:

 Release Notes

:

 

The following sections describe important notes concerning the new software features supported by the 
Cisco 1700 series routers for Release 12.2(13)ZF2.

Frame Relay SVCs over ISDN is an existing feature of Cisco IOS software. To activate the Frame Relay 
SVCs over ISDN functionality, configure the SVCs under dialer interface or BRI interface, depending 
on where Frame Relay encapsulation is specified.

Caveats describe unexpected behavior or defects in Cisco IOS software releases. Severity 1 caveats are 
the most serious caveats, severity 2 caveats are less serious, and severity 3 caveats are the least serious 
of these three severity levels.

Caveats in Release 12.2 T are also in Release 12.2(13)ZF2. For information on caveats in Cisco IOS 
Release 12.2 T, refer to the 

 document. For information on caveats 

in Cisco IOS Release 12.2, refer to the 

 document. These documents 

list severity 1 and 2 caveats, and are located on Cisco.com and the Documentation CD.

1. IP address 10.0.0.3 is the secure ARP entry for R2 in the DHCP server.
2. IP address 10.0.0.3 is the DHCP obtained IP address from R1.