Cisco Cisco IOS Software Release 12.2(33)SRE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
BGP Route-Map Continue Support for Outbound
Policy
Policy
The BGP Route-Map Continue Support for Outbound Policy feature introduces support for continue
clauses to be applied to outbound route maps. The continue clause allows for more programmable policy
configuration and route filtering and introduces the capability to execute additional entries in a route map
after an entry is executed with successful match and set clauses. Continue clauses allow the network
operator to configure and organize more modular policy definitions so that specific policy configurations
need not be repeated within the same route map.
clauses to be applied to outbound route maps. The continue clause allows for more programmable policy
configuration and route filtering and introduces the capability to execute additional entries in a route map
after an entry is executed with successful match and set clauses. Continue clauses allow the network
operator to configure and organize more modular policy definitions so that specific policy configurations
need not be repeated within the same route map.
Configuration Information
Configuration information is included in the “Connecting to a Service Provider Using External BGP”
module of the Cisco IOS BGP Configuration Guide, Release 12.4T,
module of the Cisco IOS BGP Configuration Guide, Release 12.4T,
at the following URL:
The following sections provide information about this feature:
•
Filtering Traffic Using Continue Clauses in a BGP Route Map
•
Filtering Traffic Using Continue Clauses in a BGP Route Map: Example
For a complete list of features included in the “Connecting to a Service Provider Using External BGP”
module, see the Feature Information Table located toward the end of the module.
module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Routing Protocols Command Reference,
Release 12.2SR, at the following URL:
Release 12.2SR, at the following URL:
New or Modified Commands
There are no new or modified commands for this feature.
List of All Release 12.2SR Commands
An alphabetical list of all Cisco IOS Release 12.2SR commands is in the Cisco IOS Master Commands
List, Release 12.2SR, at the following URL:
List, Release 12.2SR, at the following URL: