Cisco Cisco IOS Software Release 12.2(35)SE 릴리즈 노트
5
Release Notes for the Cisco Catalyst Blade Switch 3030, Cisco IOS Release 12.2(37)SE and Later
OL-12639-02
Upgrading the Switch Software
Upgrading a Switch by Using the Device Manager
You can upgrade switch software by using the device manager. For detailed instructions, click Help.
Note
When using the device manager to upgrade your switch, do not use or close your browser session after
the upgrade process begins. Wait until after the upgrade process completes.
the upgrade process begins. Wait until after the upgrade process completes.
Upgrading a Switch by Using the CLI
This procedure is for copying the combined tar file to the switch. You copy the file to the switch from a
TFTP server and extract the files. You can download an image file and replace or keep the current image.
TFTP server and extract the files. You can download an image file and replace or keep the current image.
To download software, follow these steps:
Step 1
Use
to identify the file that you want to download.
Step 2
Download the software image file. If you have a SmartNet support contract, log in to cisco.com and go
to this URL, and log in to download the appropriate files:
to this URL, and log in to download the appropriate files:
Click on “Download Software Area,” and search for CBS3000 to download the appropriate files:
•
To download the metro base, metro access, or metro IP access files for the switch, click
Cisco Catalyst Blade Switch 3030.
Cisco Catalyst Blade Switch 3030.
•
To obtain authorization and to download the cryptographic software files, click Cisco Catalyst
Blade Switch 3030 3DES Cryptographic Software.
Blade Switch 3030 3DES Cryptographic Software.
Step 3
Copy the image to the appropriate TFTP directory on the workstation, and make sure that the TFTP
server is properly configured.
server is properly configured.
For more information, see Appendix B in the software configuration guide for this release.
Step 4
Log into the switch through the console port or a Telnet session.
Note
You can also access the switch by using the interface provided by the Dell Remote Access
Controller/Modular Chassis (DRAC/MC) management board.
Controller/Modular Chassis (DRAC/MC) management board.
See the “Connecting through the DRAC/MC” section of the Cisco Catalyst Blade Switch 3030
Getting Started Guide for instructions on how to connect to the switch by using the DRAC/MC.
Getting Started Guide for instructions on how to connect to the switch by using the DRAC/MC.
Step 5
(Optional) Ensure that you have IP connectivity to the TFTP server by entering this privileged EXEC
command:
command:
Switch# ping tftp-server-address
For more information about assigning an IP address and default gateway to the switch, see the software
configuration guide for this release.
configuration guide for this release.
Step 6
Download the image file from the TFTP server to the switch. If you are installing the same version of
software that is currently on the switch, overwrite the current image by entering this privileged EXEC
command:
software that is currently on the switch, overwrite the current image by entering this privileged EXEC
command:
Switch# archive download-sw /overwrite /reload
tftp:
[[//location]/directory]/image-name.tar