Cisco Cisco IOS Software Release 12.2(27)SBC
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
PPPoE Session Limiting on Inner QinQ VLAN
First Published: December 4, 2006
Last Updated: December 4, 2006
Last Updated: December 4, 2006
The PPPoE Session Limiting on Inner QinQ VLAN feature allows a service provider to limit each
customer to one PPPoE client in use by providing the ability to limit the number of PPPoE over QinQ
(IEEE 802.1Q VLAN tunnel) sessions based on the inner VLAN ID configured under a subinterface.
This capability eliminates the need to configure large numbers of subinterfaces.
customer to one PPPoE client in use by providing the ability to limit the number of PPPoE over QinQ
(IEEE 802.1Q VLAN tunnel) sessions based on the inner VLAN ID configured under a subinterface.
This capability eliminates the need to configure large numbers of subinterfaces.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•
•
•