Cisco Cisco IOS Software Release 12.2(25)S
CNS Agents
Additional References
16
Cisco IOS Release 12.2(25)S
Enabling and Configuring CNS Agents: Example
The following example shows various CNS agents being enabled and configured starting with the
configuration agent being enabled with the cns config partial command to configure an incremental
(partial) configuration on a remote router. The CNS configuration engine IP address is 172.28.129.22,
and the port number is 80. The CNS exec agent is enabled with an IP address of 172.28.129.23, and the
CNS event agent is enabled with an IP address of 172.28.129.24. Until the CNS event agent is enabled,
no other CNS agents are operational.
configuration agent being enabled with the cns config partial command to configure an incremental
(partial) configuration on a remote router. The CNS configuration engine IP address is 172.28.129.22,
and the port number is 80. The CNS exec agent is enabled with an IP address of 172.28.129.23, and the
CNS event agent is enabled with an IP address of 172.28.129.24. Until the CNS event agent is enabled,
no other CNS agents are operational.
Router(config)# cns config partial 172.28.129.22 80
Router(config)# cns exec 172.28.129.23 source 172.22.2.2
Router(config)# cns event 172.28.129.24 source 172.22.2.1
Router(config)# exit
Additional References
The following sections provide references related to CNS agents.
Related Documents
Standards
Related Topic
Document Title
CNS event agent
CNS Event Agent feature document, Release 12.2(2)T
CNS configuration engine
Cisco Intelligence Engine 2100 Configuration Registrar Manual,
Release 1.1 or later
Release 1.1 or later
CNS flow-through provisioning
CNS Flow-Through Provisioning feature document,
Release 12.2(8)T
Release 12.2(8)T
Standards
Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
feature, and support for existing standards has not been
modified by this feature.
—