Cisco Cisco IOS Software Release 12.2(58)SE 릴리즈 노트

Error Message MAB-5-FAIL: Authentication failed for client ([chars]) on Interface 
[chars] AuditSessionID [chars]

Authentication was unsuccessful. The first [chars] is the client, the second [chars] is the 

interface, and the third [chars] is the session ID.

No action is required.

Error Message MAB-5-SUCCESS: Authentication successful for client ([chars]) on 
Interface [chars] AuditSessionID [chars]

Authentication was successful. The first [chars] is the client, the second [chars] is the 

interface, and the third [chars] is the session ID.

No action is required.

Error Message IP-3-STCKYARPOVR: Attempt to overwrite Sticky ARP entry: [inet], hw: 
[enet] by hw: [enet]\n", MSGDEF_LIMIT_FAST

Multiple stations are configured with the same IP address in a private VLAN. (This 

could be a case of IP address theft.) [inet] is the IP address that is configured, the first [enet] is the 
original MAC address associated with the IP address, and the second [enet] is the MAC address that 
triggered this message.

Change the IP address of one of the two systems.

This information in the Cisco Catalyst Blade Switch 3040 Getting Started Guide has been updated:

When you launch Express Setup, you are prompted for the switch password. Enter the default pass-
word, cisco. The switch ignores text in the username field. Before you complete and exit Express 
Setup, you must change the password from the default password, cisco. 

User documentation in HTML format includes the latest documentation updates and might be more 
current than the complete book PDF available on Cisco.com.

These documents provide complete information about the Cisco Catalyst Blade Switch 3040 for FSC 
and are available at Cisco.com:

These documents provide complete information about the Cisco Catalyst Blade Switch 3040 for FSC: