Cisco Cisco IOS Software Release 12.2(25)SEC
Area Command in Interface Mode for OSPFv2
ip ospf area
8
Cisco IOS Release: Multiple releases
Examples
The following example enables OSPFv2 on Ethernet interface 0/0/2 and prevents secondary IP addresses
from being advertised:
from being advertised:
Router(config)# interface Ethernet0/0/2
Router(config-if)# ip ospf 10 area 0 secondaries none
Related Commands
Command
Description
interface
Configures an interface type and enters interface configuration mode.
network area
Defines the interfaces on which OSPF runs and defines the area ID for those
interfaces.
interfaces.
show ip ospf interface
Displays OSPF-related interface information.