Cisco Cisco IOS XE 3.5E 릴리즈 노트
22
Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE
OL-32621-01
Scaling Guidelines
–
RFC5460 DHCPv6 Bulk Leasequery
–
DHCPv6 Relay Source Configuration
–
RFC 4293 IP-MIB (IPv6 only)
–
RFC 4292 IP-FORWARD-MIB (IPv6 only)
–
RFC4292/RFC4293 MIBs for IPv6 traffic
–
Layer 2 Tunneling Protocol Enhancements
–
UniDirectional Link Routing (UDLR)
–
Pragmatic General Multicast (PGM)
–
DAI, IPSG Interoperability
–
Ingress Rate Limiting
–
Ingress Strict Priority Queuing (Expedite)
–
Weighted Random Early Detect (WRED)
–
Improvements in QoS policing rates
–
Fast SSID support for guest access WLANs
Scaling Guidelines
Limitations and Restrictions
•
You cannot configure NetFlow export using the Ethernet Management port (g0/0).
•
The maximum committed information rate (CIR) for voice traffic on a wireless port is 132 Mb/sec.
•
MACSec Key Agreement (MKA) encryption is not supported between switches and host devices.
•
Flex Links are not supported. We recommend that you use spanning tree protocol (STP) as the
alternative.
alternative.
•
Outdoor access points are supported only when they are in Local mode.
•
VRRPv3 for IPv4 and IPv6 is not supported.
•
When configuring QoS queuing policy, the sum of the queuing buffer should not exceed 100%.
•
For QoS policies, only switched virtual interfaces (SVI) are supported for logical interfaces.
•
QoS policies are not supported for port-channel interfaces, tunnel interfaces, and other logical
interfaces.
interfaces.
•
Restrictions for Cisco TrustSec:
–
Cisco TrustSec can be configured only on physical interfaces, not on logical interfaces.
Table 11
Scaling Guidelines
System Feature
Maximum Limit
Number of HTTP session redirections system-wide (wired/wireless)
Up to 100 clients per second
Number of HTTPS session redirections system-wide (wired/wireless) Up to 20 clients per second