Cisco Cisco ASA 5506W-X with FirePOWER Services 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Components Used
Background Information
Overview of Security Intelligence feed
Manually add IP addresses to Global-Blacklist and Global-Whitelist
Create the Custom list of blacklist IP Address
Configure the Security Intelligence
Deploy Access Control Policy
Security Intelligence’s events Monitoring
Verify
Troubleshoot
Related Information
Introduction
This document describes Cisco Security Intelligence/IP address reputation and configuration of IP
blacklisting (Blocking) while using custom/auto feed of low repute IP address.
blacklisting (Blocking) while using custom/auto feed of low repute IP address.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge of ASA (Adaptive Security Appliance) firewall, ASDM (Adaptive Security Device
Manager)
Manager)
●
FirePOWER appliance knowledge
●
Note: Security Intelligence filtering requires a Protection license.
Components Used
The information in this document is based on these software and hardware versions:
ASA FirePOWER modules (ASA 5506X/5506H-X/5506W-X, ASA 5508-X, ASA 5516-X )
running software version 5.4.1 and above
running software version 5.4.1 and above
●
ASA FirePOWER module (ASA 5515-X, ASA 5525-X, ASA 5545-X, ASA 5555-X) running
software version 6.0.0 and above
software version 6.0.0 and above
●
The information in this document was created from the devices in a specific lab environment. All of