Cisco Cisco IPS 4255 Sensor 릴리즈 노트

the same LAN segment as the sensor. Any network with an RTT less than a 100 milliseconds should 
provide reliable delivery of the image. Be aware that some TFTP servers limit the maximum file size that 
can be transferred to ~32 MB.

IDM version 7.1.1 is included within IME 7.1.1. You can use IME 7.1.1 to configure IPS 6.1, 6.2, 7.0, 
and 7.1 sensors.

Use the following tools for configuring Cisco IPS 7.1(1)E4 sensors:

Cisco IDM 7.1.1

IDM 7.1.1 is included within the IPS 7.1(1)E4 files.

IDM 7.1.1 is included within IME 7.1.1.

IDM 7.1.1 requires JRE 1.6 or later. 

Cisco IME 7.1.1

IPS CLI included in IPS 7.1(1)E4

Cisco ASDM 6.3.4

Use the following tools for monitoring Cisco IPS 7.1(1)E4 sensors:

IDM 7.1.1

IME 7.1.1

MARS minimum version 5.2 and latest version 6.0.5

CSM 4.0 and later

You may need to configure viewers that are already configured to monitor the earlier version 
sensors to accept a new SSL certificate for the Cisco IPS7.1(1)E4 sensors.

Cisco IPS 7.1(1)E4 contains the following new and changed information:

Support for the ASA 5585-X with IPS SSP-10, IPS SSP-20, IPS SSP-40, or IPS SSP-60.

String ICMP XL, String TCP XL, and String UDP XL engines that provide optimized operation for 
the ASA 5585-X with IPS SSP-10, IPS SSP-20, IPS SSP-40, or IPS SSP-60.

Bypass mode not supported.

The ASA 5585-X IPS SSP does not support bypass mode. The adaptive security appliance will 
either fail open, fail close, or fail over depending on the configuration of the adaptive security 
appliance and the type of activity being done on the ASA 5585-X IPS SSP. 

Contains the S552 signature update.