Cisco Cisco IPS 4255 Sensor 릴리즈 노트

Serial Number:          P300000220

Sensor up-time is 3 days.

Using 1031888896 out of 2093682688 bytes of available memory (49% usage)

system is using 17.8M out of 29.0M bytes of available disk space (61% usage)

application-data is using 52.4M out of 166.6M bytes of available disk space (33% usage)

boot is using 37.8M out of 68.5M bytes of available disk space (58% usage)

MainApp          N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500   Running

AnalysisEngine   N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500   Running

CLI              N-2007_JUN_19_16_45   (Release)   2007-06-19T17:10:20-0500

Upgrade History:

  IPS-K9-7.0-2-E3 15:36:05 UTC Thu Apr 24 2008

Recovery Partition Version 1.1 - 7.0(2)E3

Host Certificate Valid from: 25-Apr-2008 to 26-Apr-2010

sensor#

Copy your license key from a sensor to a server to keep a backup copy of the license.

sensor# copy license-key scp://user@10.89.147.3://tftpboot/dev.lic 

Password: *******

sensor#

If you have a version of Cisco IPS Event Viewer installed, the Install wizard prompts you to remove it 
before installing the IME. 

The IME event monitoring is also supported in IOS-IPS versions that support the Cisco IPS 5.x/6.x 
signature format. We recommend IOS-IPS 12.4(15)T4 if you intend to use the IME to monitor an IOS 
IPS device. Some of the new IME functionality including health monitoring is not supported.

Do not install the IME on top of existing installations of CSM. You must uninstall CSM before installing 
the IME. Do not install CSM on top of existing installations of the IME.

Observe the following when installing or upgrading the IME:

You can install the IME over all versions of the IME but not over IEV. All alert database and user 
settings are preserved.

The IME detects previous versions of IEV and prompts you to manually remove the older version 
before installing the IME or to install the IME on another system. The installation program then 
stops.