Cisco Cisco IPS 4255 Sensor 릴리즈 노트

IPS 4510

IPS 4520

IPS 4520-XL

ASA 5585-X IPS SSP-10

ASA 5585-X IPS SSP-20

ASA 5585-X IPS SSP-40

ASA 5585-X IPS SSP-60

ASA 5512-X IPS SSP

ASA 5515-X IPS SSP

ASA 5525-X IPS SSP

ASA 5545-X IPS SSP

ASA 5555-X IPS SSP

You may need to configure viewers that are already configured to monitor the earlier 
version sensors to accept a new SSL certificate for the Cisco IPS 7.3 sensors.

For the procedure to apply IPS 7.3(4)E4 to sensors using CSM 4.4 SP1 or later, see 

.

Cisco IPS 7.3(4)E4 contains the following new and changed information:

IDM 7.3.4

Signature update S877

The ASA 5585-X IPS SSP series and ASA 5500-X IPS SSP series are added back to the IPS 7.3 line. 

This release supports functionality related to Enhanced Security and Manageability.

To use automatic signature upgrades in 7.3(4), you must accept a EULA at the link that is emailed 
to the registered Cisco account used to configure the automatic upgrade service.

The Cisco IPS 4300 series sensors with the AC power supply can restore the previous power state of the 
system if AC power is lost. Earlier IPS 4300s (V01) require you to turn on the power with the power 
switch. Newer IPS 4300s (V02) automatically turn on when you plug in the power cable. 

To determine your version, do one of the following:

At the CLI, enter the show inventory command and look for V01 or V02 in the output.

On the back of the chassis, look at the VID PID label for V01 or V02.

The V01 chassis has the following limitations (these limitations do not apply to the V02 chassis):