Cisco Cisco IPS 4520 Sensor 릴리즈 노트

ASA 5515-X IPS SSP

ASA 5525-X IPS SSP

ASA 5545-X IPS SSP

ASA 5555-X IPS SSP

You may need to configure viewers that are already configured to monitor the earlier 
version sensors to accept a new SSL certificate for the Cisco IPS 7.1 sensors.

For the procedure to apply IPS 7.1(7)E4 to sensors using CSM 4.3 SP1 or later, see 

Cisco IPS 7.1(7)E4 contains the following new and changed information:

IDM 7.1.7.

Signature update S691. 

Continuing support for the IPS 4240, IPS 4255, IPS 4260, ASA 5500 AIP SSM series, IPS 4270-20, 
IPS 4345, IPS 4360, ASA 5585-X IPS SSP series, and ASA 5500-X IPS SSP series.

The default value of the Cisco server IP address has been changed from 198.133.219.25 to 
72.163.4.161 in the Auto Update URL configuration. If you have automatic update configured on 
your sensor, you may need to update your firewall rules to allow sensor connectivity to this new IP 
address.

IPS 7.1(7)E4 reverses the SMB protocol-related inspection enhancements delivered as part of the 
IPS 7.1(5)E4 release and also addresses a signature downgrade issue with ASA 5500 AIP SSM 
platforms.

IPS 7.1(7)E4 deprecates the use of licenses for versions 6.0.x or earlier. Obtain new licenses for 
versions 6.0.x and later and apply to your sensor before upgrading to IPS 7.1(7)E4. You can obtain 
licenses at this URL:

For the procedure for obtaining and installing the license, see 

.

For IPS standalone appliances with 1 G and 10 G fixed or add-on interfaces, the maximum jumbo frame 
size is 9216 bytes. For integrated IPS sensors, such as the ASA 5500-X and ASA 5585-X series, refer to 
the following URL for information:

9