Cisco Cisco IPS 4345 Sensor 릴리즈 노트

To continue with advanced setup for the ASA 5585-X IPS SSP, follow these steps:

Session in to the ASA 5585-X IPS SSP using an account with administrator privileges.

asa# session 1

Enter the 

 command. The System Configuration Dialog is displayed. Press Enter or the spacebar 

to skip to the menu to access advanced setup.

Enter 

to access advanced setup. 

Specify the Telnet server status. You can disable or enable Telnet services. The default is disabled.

Specify the web server port. The web server port is the TCP port used by the web server (1 to 65535). 
The default is 443. 

The web server is configured to use TLS/SSL encryption by default. Setting the port to 80 does 
not disable the encryption.

Enter 

 to modify the interface and virtual sensor configuration.

Current interface configuration

 Command control: Management0/0

 Unassigned:

  Monitored:

   PortChannel0/0

 

 Virtual Sensor: vs0

  Anomaly Detection: ad0

  Event Action Rules: rules0

  Signature Definitions: sig0

 

  [1] Edit Interface Configuration

  [2] Edit Virtual Sensor Configuration

  [3] Display configuration

Option:

Enter 

 to edit the interface configuration.

You do not need to configure interfaces on the ASA 5585-X IPS SSP. You should ignore the 
modify interface default VLAN setting. The separation of traffic across virtual sensors is 
configured differently for the ASA 5585-X IPS SSP than for other sensors. 

  [1] Modify interface default-vlan.

Option:

Press Enter to return to the top-level interface and virtual sensor configuration menu.

  [1] Edit Interface Configuration

  [2] Edit Virtual Sensor Configuration

  [3] Display configuration

Option:

Enter 

 to edit the virtual sensor configuration.

  [1] Remove virtual sensor.

  [2] Modify "vs0" virtual sensor configuration.