Cisco Cisco IPS 4520 Sensor 릴리즈 노트

ASA 5515-X IPS SSP

ASA 5525-X IPS SSP

ASA 5545-X IPS SSP

ASA 5555-X IPS SSP

To upgrade IPS 4510 and IPS 4520 using CSM, you must use 
IPS-CSM-K9-7.1-6-E4.zip, which is posted with the IPS 7.1(6)E4 software.

CSM 4.2 SP1 cannot currently manage the following devices running IPS 7.1(6)E4: 
IPS 4240, IPS 4255, IPS 4260, IPS 4345, IPS 4345-DC, IPS 4510, IPS 4520, the ASA 
5500 AIP SSM series, and the ASA 5500-X series. Support for these platforms is 
available in CSM 4.3 SP1.

CSM 4.3 cannot currently manage the following devices running IPS 7.1(6)E4: 
IPS 4240, IPS 4255, IPS 4260, and the ASA 5500 AIP SSM series. Support for these 
platforms is available in CSM 4.3 SP1.

You may need to configure viewers that are already configured to monitor the earlier 
version sensors to accept a new SSL certificate for the Cisco IPS 7.1 sensors.

For th e procedure to apply IPS 7.1(6)E4 to sensors using CSM 4.3 SP1 or later, see 

.

Cisco IPS 7.1(6)E4 contains the following new and changed information:

Support for the IPS 4510 and IPS 4520.

IDM 7.1.5.

Signature update S648. The signature update for the IPS 4500 series is S664.

Continuing support for the IPS 4240, IPS 4255, IPS 4260, ASA 5500 AIP SSM series, IPS 4270-20, 
IPS 4345, IPS 4360, ASA 5585-X IPS SSP series, and ASA 5500-X IPS SSP series.

The default value of the Cisco server IP address has been changed from 198.133.219.25 to 
72.163.4.161 in the Auto Update URL configuration. If you have automatic update configured on 
your sensor, you may need to update your firewall rules to allow sensor connectivity to this new IP 
Address.

IPS 7.1(6)E4 reverses the SMB protocol-related inspection enhancements delivered as part of the 
IPS 7.1(5)E4 release and also addresses a signature downgrade issue with ASA 5500 AIP SSM 
platforms.