Cisco Cisco IPS 4360 Sensor 백서
19
Firewall
August 2012 Series
19
Step 12:
Enter the interface
Subnet Mask
, and then click
OK
. (Example:
255.255.255.0)
Step 13:
Click
Apply
to save the configuration.
Step 14:
Navigate to
Configuration > Device Management > High
Availability > Failover.
Step 15:
On the Interfaces tab, in the
Standby IP address
column, enter the
IP address of the standby unit for the interface you just created. (Example:
192.168.23.2)
192.168.23.2)
Step 16:
Select
Monitored
, and then click
Apply
.
Procedure 3
Configure the DMZ routing
Step 1:
Navigate to
Configuration > Device Setup > Routing > EIGRP > Setup
.
Step 2:
On the Networks tab, click
Add
.
Step 3:
In the Add EIGRP Network dialog box, in the
IP Address
box, enter
the address that summarizes all DMZ networks. (Example: 192.168.16.0)
Step 4:
In the
Netmask
box, enter the DMZ summary netmask, and then
click
OK
. (Example: 255.255.248.0)
Step 5:
In the Setup pane, click
Apply
. This saves the configuration.