Cisco Cisco IPS 4360 Sensor 백서
47
Intrusion Prevention
August 2012 Series
47
Option 1. Complete the basic configuration for Cisco ASA IPS
modules
modules
Step 1:
From a client on the internal network, navigate to the firewall’s inside
IP address, and launch the Cisco ASA Security Device Manager. (Example: )
Step 2:
Click on the Configuration tab, and then click
IPS
.
Step 3:
In the Connecting to IPS dialog box, enter the IP address, username
and password you specified on the IPS sensor, and then click
Continue.
Cisco ASDM imports the current configuration from the IPS sensor, and the
startup wizard launcher is displayed in the main window.
startup wizard launcher is displayed in the main window.
Step 4:
Click
Launch Startup Wizard
.
Step 5:
In the
Startup Wizard: Sensor Setup
, enter an NTP server and any
necessary credentials for the server, set the time zone and summertime
settings, and then click
settings, and then click
Next.
Step 6:
In the
DNS Primary
box, enter the DNS server address (Ex:
10.4.48.10)
Step 7:
In the
Zone Name
drop-down list, select the appropriate time zone.