Cisco Cisco IPS 4510 Sensor 백서
27
Firewall
August 2012 Series
27
Step 12:
Select
Monitored, and then click Apply
.
Next, you will create the default route to the primary Internet CPE’s address.
Step 13:
In
Configuration > Device Setup > Routing > Static Routes
, click
Add
.
Step 14:
In the Add Static Route dialog box, in the
Interface
list, choose the
interface edited in Step 2 (Example: outside)
Step 15:
In the
Network
box, enter
0.0.0.0/0.0.0.0
.
Step 16:
In the
Gateway IP
box, enter the primary Internet CPE’s IP
address, and then click
OK
. (Example: 172.16.130.126)
Step 17:
On the Static Routes pane, click
Apply
.