Cisco Cisco Industrial Security Appliance 3000 설치 가이드

For power and alarm connections, use UL- and CSA-rated style 1007 or 1569 twisted-pair copper 
appliance wiring material (AWM) wire

ESD-preventive cord and wrist strap.

Wire crimper for chassis grounding.

Wire for connecting the chassis to an earth ground.

Ethernet cables for connecting to the Gigabit Ethernet ports.

Ratcheting torque flathead screwdriver that exerts up to 15 in-lb (1.69 N-m) of pressure.

A number-2 Phillips screwdriver.

Wire-stripping tool

IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you 
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar 
with standard practices for preventing accidents. Use the statement number provided at the end of 
each warning to locate its translation in the translated safety warnings that accompanied this device. 
Statement 1071

Read the installation instructions before connecting the system to the power source. Statement 1004

Exposure to some chemicals could degrade the sealing properties of materials used in the sealed 
relay device. Statement 381

This product relies on the building’s installation for short-circuit (over-current) protection. Ensure 
that the protective device is rated not greater than: 2 A Statement 1005

This unit is intended for installation in restricted access areas. A restricted access area can be 
accessed only through the use of a special tool, lock and key, or other means of security. 
Statement 1017

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the 
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection 
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. 
Statement 1030

Ultimate disposal of this product should be handled according to all national laws and regulations. 
Statement 1040