Cisco Cisco ASA 5512-X Adaptive Security Appliance 문제 해결 가이드
ASA Troubleshooting Guide: Missing Logs at
Syslog Destination(s)
Syslog Destination(s)
Document ID: 113603
Contributed by Prapanch Ramamoorthy, Cisco TAC Engineer.
Jul 20, 2012
Jul 20, 2012
Contents
Introduction
Before You Begin
Requirements
Components Used
Conventions
Feature Information
Troubleshooting Methodology
Data Analysis
Review the Syslogging Configuration
Output of show logging queue
Common Problems
Related Information
Before You Begin
Requirements
Components Used
Conventions
Feature Information
Troubleshooting Methodology
Data Analysis
Review the Syslogging Configuration
Output of show logging queue
Common Problems
Related Information
Introduction
This document describes how to troubleshoot the problem with the capability of the Adaptive Security
Appliance (ASA) to send syslogs to various destinations, and, more specifically, issues where symptoms such
as these are observed:
Appliance (ASA) to send syslogs to various destinations, and, more specifically, issues where symptoms such
as these are observed:
Slow real−time logging on Adaptive Security Device Manager (ASDM).
•
Intermittent syslogs missing at one or more syslog destinations.
•
Before You Begin
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco ASA and it is not limited to a specific ASA software
version.
version.
Conventions
For more information on document conventions, refer to Cisco Technical Tips Conventions.
Feature Information
ASAs, as most other Cisco devices, are capable of sending syslogs to multiple syslog destinations. Some of
the more commonly used destinations are illustrated here:
the more commonly used destinations are illustrated here: