Cisco Cisco ASA 5585-X Adaptive Security Appliance 문제 해결 가이드

ASA 5500−X: Clear a Console Connection to an
Installed IPS/CX Module

Document ID: 116404

Contributed by Prapanch Ramamoorthy, Cisco TAC Engineer.
Aug 20, 2013

Contents

Introduction
Prerequisites
Requirements
Components Used
Problem
Solution
Alternate Solution
Related Information

Introduction

This document describes a common problem that users who manage Cisco Adaptive Security Appliances
(ASAs) might encounter. Cisco ASA 5500−X Series appliances provide next−generation firewall services
with the optional ability to install a software−based Intrusion Prevention System (IPS) module or a Cisco
ASA CX (Context Aware) module.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Cisco ASA Command Line Interface (CLI).

•

IPS or CX Modules for ASA 5500−X Series Appliances

•

Components Used

The information in this document is based on Cisco ASA 5500−X Series next−generation firewall appliances.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Problem

When you try to establish a console connection to the software IPS or CX module installed, you might
encounter an error message that suggests someone is already logged into the console. For example:

ciscoasa# session cxsc console

ERROR: An existing console session is in progress with module cxsc.