Cisco Cisco ASA 5515-X Adaptive Security Appliance 문제 해결 가이드
Domain Controller Status Listed as Down in Active
Directory Agent
Directory Agent
Document ID: 113424
Contributed by Michael Robertson, Cisco TAC Engineer.
Jan 26, 2012
Jan 26, 2012
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Introduction
This document describes how to identify and resolve a problem that occurs when you configure the Active
Directory Agent software to interact with a Windows Domain Controller.
Directory Agent software to interact with a Windows Domain Controller.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the ASA Active Directory Software.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Problem
When you use the adacfg dc create command in order to the install the Active Directory (AD) agent on a
domain controller (DC) in your Windows domain, connection status between the AD agent and the DC is
listed as down.
domain controller (DC) in your Windows domain, connection status between the AD agent and the DC is
listed as down.
Use the adacfg dc list command in order to view connection status:
C:\IBF\CLI>adacfg dc list
Name Host/IP Username Domain−Name Latest Status