Cisco Cisco Aironet 1552WU Outdoor Access Point 설치 가이드

Cisco Systems, Inc.
www.cisco.com

This guide describes how to assemble and install the antenna bracket kit (AIR-ACCAMK-1) which is 
used to mount directional antennas on Cisco 1550 and 1570 Series Outdoor Access Points (referred to 
in this document as access points).

The antenna bracket kit contains four bracket sections and fasteners that you can assemble in multiple 
configurations to position and aim directional antennas. The bracket kit can be used with these 
directional antennas:

2.4-GHz, 13-dBi Directional Antenna, two ports, N connectors (AIR-ANT2413P2M-N=)

5-GHz, 14-dBi Directional Antenna, two ports, N connectors (AIR-ANT5114P2M-N=)

This equipment is to be installed by trained and qualified personnel, as per these installation instructions. 
The installer is responsible for obtaining any required local or national safety inspections of the 
structural integrity of the installation by the local authority or inspection department.

You need one antenna bracket kit per antenna. To mount two antennas, you need two kits.