Cisco Cisco Aironet 1522 Lightweight Outdoor Mesh Access Point 집계 된 데이터
Product Bulletin
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 6
Table 1.
Software Images List
Products
4.1.192.22M and Related Software Images
Access Points
Mesh Access Points
Image
Boot Image
1130
1240
1505
1510
1520
c1130-k9w9-tar.124-3g.JMC
c1124-k9w9-tar.124-3g.JMC
VxWorks
VxWorks
c1520-k9w9-tar.124-3g.JMC
1130-boot-m.124-3g.JMC
1240-boot-m.124-3g.JMC
VxWorks
VxWorks
1520-boot-m.124-3g.JMC
Non-Mesh Access Points
1100
1130
1200
1240
1310
c1100-k9w8-tar.124-3g.JA2
c1130-k9w8-tar.124-3g.JA2
c1200-k9w8-tar.124-3g.JA2
c1240-k9w8-tar.124-3g.JA2
c1310-k9w8-tar.124-3g.JA2
c1100-boot-m.124-10b.JA
c1130-boot-m.124-10b.JA
c1200-boot-m.124-10b.JA
c1240-boot-m.124-10b.JA
c1310-boot-m.124-10b.JA
WLC-4400
AIR-WLC4400-K9-1-192-22M-MESH.aes
WLC-2100
AIR-WLC2100-K9-4-1-192-22M-MESH.aes
WiSM
SWISMK9-4-1-22M-MESH.aes
WCS
WCS-STANDARD-K9-5.0.56.0.exe
WCS Navigator
NAVIGATOR-K9-1.2.56.0.exe
New Features
The following new features are supported in Release 4.1.192.22M:
Support for Cisco Aironet 1524 Mesh Access Point
The new Cisco Aironet 1524 Mesh Access Point (AIR-LAP1524PS-A-K9) is installed with new,
band-specific radios operating in the 5.8- and 4.9-GHz bands, in addition to operating with a 2.4-
GHz radio. With Release 4.1.192.22M, the 2.4- and 4.9-GHz radios provide access connectivity to
wireless clients operating in these bands, with the 5.8-GHz radio providing backhaul connectivity
between mesh access points. This configuration allows public safety customers with a license to
operate in the 4.9-GHz band to provide wireless access for 4.9-GHz clients, along with client
devices that operate in the 2.4-GHz band. For network providers, the Cisco Aironet 1524 Access
Point allows them to offer access services to both public safety users and other users with a single
installation. (Note that all traffic will backhaul over the 5.8-GHz radio.)
For 4.9-GHz Band, Channels that Are 5 and 10 MHz Wide
When operating in the 4.9-GHz band, the Cisco Aironet 1522 and 1524 Access Points can be
configured to operate in channels 5 or 10 MHz wide, in addition to 20 MHz-wide channels. This
allows the customer to partition their allotted spectrum into a larger number of smaller channels,
which may aid in channel planning.
Infrastructure Workgroup Bridge on Cisco IOS Software Mesh Access Points
The Cisco Aironet 1520 Series Access Points (1522 and 1524) provide access services to Cisco
Aironet Workgroup Bridges, extending mobility to Ethernet devices. With this feature, a 2.4- or 4.9-
GHz wireless mobile interface card (WMIC) installed in a Cisco 3200 Series rugged integrated
services router and configured as a workgroup bridge can connect to the wireless mesh network,
providing network access to devices such as video cameras or laptops. This feature, previously