Cisco Cisco ASA 5580 Adaptive Security Appliance 설치 가이드
2
Migrating from the Cisco ASA 5500 to the Cisco Adaptive Security Virtual Appliance
Unsupported Features
Unsupported Features
The ASAv does not support the following ASA features:
•
Clustering
•
Multiple context mode
•
Active/Active failover
•
EtherChannels
•
Advanced Inspection and Prevention Security Services Module (AIP SSM)
•
Content Security and Control Security Services Module (CSC SSM)
•
Context Security (CX) Module
•
Shared AnyConnect Premium Licenses
Modifying a Cisco ASA 5500 Configuration to an ASAv
Configuration
Configuration
To migrate an ASA 5500 configuration to an ASAv configuration, follow these guidelines:
Guidelines
•
You may perform a migration using either the CLI or ASDM.
•
To use ASDM, you must configure the ASAv for HTTP access.
•
Use a text editor to modify the source configuration file for the ASAv.
•
The ASAv does not support multiple context mode; you can, however, convert a security context
configuration into an ASAv configuration.
configuration into an ASAv configuration.
•
The ASAv does not support ASA clustering; therefore, the cluster-related interface configuration
needs to be removed before you can use it on the ASAv.
needs to be removed before you can use it on the ASAv.
Note
You may copy an unmodified hardware configuration onto an ASAv. However, you will receive “Invalid
Input” and other errors or warnings for the commands that are not supported in this version of the virtual
platform.
Input” and other errors or warnings for the commands that are not supported in this version of the virtual
platform.