Cisco Cisco ASA 5515-X Adaptive Security Appliance - No Payload Encryption 설치 가이드
7
3
Launching the Adaptive Security Device Manager
(ASDM) on the ASA
The default ASA configuration lets you connect to the default management IP address (192.168.1.1).
Depending on your network, you might need to change the ASA management IP address, or even
configure additional ASA interfaces for ASDM access (see the “Connecting the ASA IPS Management
Interface” section on page 3). For the ASA 5512-X through ASA 5555-X, if you do not have a separate
management network (see the “If you do not have an inside router” section on page 6), you need to
configure an inside interface for management, and you need to remove the name from the Management
0/0 interface. To change interface and management settings, see the ASA configuration guide.
Depending on your network, you might need to change the ASA management IP address, or even
configure additional ASA interfaces for ASDM access (see the “Connecting the ASA IPS Management
Interface” section on page 3). For the ASA 5512-X through ASA 5555-X, if you do not have a separate
management network (see the “If you do not have an inside router” section on page 6), you need to
configure an inside interface for management, and you need to remove the name from the Management
0/0 interface. To change interface and management settings, see the ASA configuration guide.
Step 1
On the management PC, launch a web browser.
Step 2
In the Address field, enter the following URL: https://ASA_IP_address/admin. The default
ASA management IP address is 192.168.1.1.
ASA management IP address is 192.168.1.1.
Step 3
Click Run ASDM to run the Java Web Start application. Alternatively, you can download the
ASDM-IDM Launcher. See the ASA configuration guide for more information.
ASDM-IDM Launcher. See the ASA configuration guide for more information.
Step 4
Accept any certificates according to the dialog boxes that appear. The Cisco ASDM-IDM
Launcher dialog box appears.
Launcher dialog box appears.
Step 5
Leave the username and password fields empty, and click OK. The main ASDM window
appears.
appears.
4
(ASA 5512-X through ASA 5555-X) License Requirements
For the ASA 5512-X through the ASA 5555-X, the ASA requires the IPS Module license. For a failover
pair, each unit requires this license. To view your current licenses, in ASDM choose Home > Device
Dashboard > Device Information > Device License. For more information about ASA licenses, see the
licensing chapter in the configuration guide.
pair, each unit requires this license. To view your current licenses, in ASDM choose Home > Device
Dashboard > Device Information > Device License. For more information about ASA licenses, see the
licensing chapter in the configuration guide.