Cisco Cisco ASA 5525-X Adaptive Security Appliance - No Payload Encryption 기술 매뉴얼

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Configure
      WebVPN Capture Tool Output Files
      Activate the WebVPN Capture Tool
      Locate and Upload the WebVPN Capture Tool Output Files
 Verify
 Troubleshoot
 Related Information

The Cisco ASA 5500 Series Adaptive Security Appliance includes a WebVPN capture tool that lets you log
information about Web sites that do not display properly over a WebVPN connection. You can enable the
capture tool from the Command Line Interface (CLI) of the security appliance. The data this tool records can
help your Cisco customer support representative troubleshoot problems.

Note: When you enable the WebVPN capture tool, it has an impact on the performance of the security
appliance. Be sure to disable the capture tool after you generate the output files.

Ensure that you meet this requirement before you attempt this configuration:

Use the Command Line Interface (CLI) in order to configure the Cisco ASA 5500 Series Adaptive
Security Appliance.

• 

The information in this document is based on the Cisco ASA 5500 Series Adaptive Security Appliance that
runs version 7.0.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.