Cisco Cisco ASA 5555-X Adaptive Security Appliance 기술 매뉴얼

다운로드
페이지 28
SSL VPN Client (SVC) on ASA with ASDM
Configuration Example
Document ID: 70511
Contents
Introduction
 Prerequisites
      Requirements
      Components Used
      Network Diagram
      Preconfiguration Tasks
      Conventions
 Configure the SSL VPN Client on an ASA
      Step 1. Enable WebVPN Access on the ASA
      Step 2. Install and Enable the SSL VPN Client on the ASA
      Step 3. Enable SVC Installation on Clients
      Step 4. Enable Rekey Parameter
      Results
 Customize Your Configuration
      Step 1. Create a Custom Group Policy
      Step 2. Create a Custom Tunnel Group
      Step 3. Create a User and Add That User to Your Custom Group Policy
 Verify
      Authentication
      Configuration
      Commands
 Troubleshoot
      SVC Error
Has the SVC established a secure session with the ASA?
Are secure sessions being established and terminated successfully?
      Check the IP Pool in WebVPN Profile
      Tips
      Commands
 Related Information
Introduction
Secure Socket Layer (SSL) Virtual Private Network (VPN) technology allows you to connect securely from
any location to an internal corporate network using one of these methods:
Clientless SSL VPN (WebVPN)Provides a remote client that requires an SSL−enabled Web
browser to access HTTP or HTTPS Web servers on a corporate local−area network (LAN). In
addition, clientless SSL VPN provides access for Windows file browsing through the Common
Internet File System (CIFS) protocol. Outlook Web Access (OWA) is an example of HTTP access.
Refer to Clientless SSL VPN (WebVPN) on ASA Configuration Example in order to learn more
about the Clientless SSL VPN.
• 
Thin−Client SSL VPN (Port Forwarding)Provides a remote client that downloads a small
Java−based applet and allows secure access for Transmission Control Protocol (TCP) applications
•