Cisco Cisco ASA for Nexus 1000V Series Switch 기술 매뉴얼
Network Diagram
This document uses this network setup:
Conventions
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
NAC Appliance (Cisco Clean Access) Configuration
Complete these steps in order to configure the NAC Appliance (Cisco Clean Access).
Login to the Clean Access Manager (CAM) using the administrative account.
1.
Choose Device Management > CCA Servers and go to the New Server tab in order to add the Cisco
Clean Access Server (CAS) to the Cisco CAM.
Clean Access Server (CAS) to the Cisco CAM.
In this example, the IP address of the CAS is 10.10.20.162. Enter the server location for reference
purposes. In this example, the CAS is located behind the Cisco ASA that is configured for remote
access VPN. The Server Location information is VPN Remote Access CAS. Select Virtual Gateway
for the Server Type.
purposes. In this example, the CAS is located behind the Cisco ASA that is configured for remote
access VPN. The Server Location information is VPN Remote Access CAS. Select Virtual Gateway
for the Server Type.
The CAS configured as a virtual gateway acts like a bridge for the managed network. The virtual
gateway configuration is good when managed clients share a subnet with trusted clients and you do
not want to modify the existing gateway or architecture. There is no need to define static routes on
any of the routing devices.
gateway configuration is good when managed clients share a subnet with trusted clients and you do
not want to modify the existing gateway or architecture. There is no need to define static routes on
any of the routing devices.
2.