Cisco Cisco Aironet 1530i Outdoor Access Point 설치 가이드

The following portions of this manual address how to deploy the Access Point. There are several 
deployment methods.

Do not operate the unit near unshielded blasting caps or in an explosive environment 
unless the device has been modified to be especially qualified for such use. Statement 364

The access point is deployed on Layer 3 networks. Layer 3 is the default mode for a newly configured 
wireless LAN controller. This guide assumes that you will be deploying your access point on a Layer 
3 network and a DHCP server is available.

Before deploying the access point, make sure the controller to which the access point will associate is 
properly configured by performing the following operations:

Verify the wireless LAN controller software version

Record the access point BVI MAC address (MAC address is located on the label on the side of the 
unit.)

Enter the access point BVI MAC address to the wireless LAN controller filter list

Use a text file to record the MAC address of all the access points you intend to deploy in your network. 
Having a file of the access point MAC addresses will be of considerable value for future testing. While 
you are compiling the list, you might want to change the name of the access point to something you 
can easily remember. The name can contain up to 32 characters. The following example, 
fisher_street:ea:co contains the last four HEX characters of the access point MAC address.