Cisco Cisco ASA 5512-X Adaptive Security Appliance 기술 매뉴얼

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Background Information
 Configure
      ASDM Configuration
      Default Behavior of Cisco ASA in order to Allow RSVP Packets
 Verify
 Troubleshoot
 Related Information

This document provides a sample configuration of how to configure the Cisco Adaptive Security Appliance
(ASA) in order to pass the IP packets with certain IP options enabled.

There are no specific requirements for this document.

The information in this document is based on these software and hardware versions:

Cisco ASA running software release version 8.3 and later

• 

Cisco Adaptive Security Manager running software release version 6.3 and later

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Each IP packet contains an IP header with an Options field. The Options field, commonly referred to as IP
Options, provides control functions that are required in some situations, but unnecessary for most common