Cisco Cisco ASA for Nexus 1000V Series Switch 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Network Diagram
Configurations
Access ASDM/SSH Across a VPN Tunnel
Verify
Command Summary
Troubleshoot
Sample Debug Output
Related Information
Introduction
This document describes how to configure a LAN-to-LAN VPN tunnel with the use of two Cisco
Adaptive Security Appliance (ASA) Firewalls. The Cisco Adaptive Security Device Manager
(ASDM) runs on the remote ASA through the outside interface on the public side, and it encrypts
both regular network and ASDM traffic. The ASDM is a browser-based configuration tool that is
designed in order to help you set up, configure, and monitor your ASA Firewall with a GUI. You do
not need extensive knowledge of the ASA Firewall CLI.
Adaptive Security Appliance (ASA) Firewalls. The Cisco Adaptive Security Device Manager
(ASDM) runs on the remote ASA through the outside interface on the public side, and it encrypts
both regular network and ASDM traffic. The ASDM is a browser-based configuration tool that is
designed in order to help you set up, configure, and monitor your ASA Firewall with a GUI. You do
not need extensive knowledge of the ASA Firewall CLI.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
IPsec encryption
●
Cisco ASDM
●
Note: Ensure that all of the devices that are used in your topology meet the requirements
that are described in the
that are described in the
gain familiarity with basic IPsec encryption.
Components Used
The information in this document is based on these software and hardware versions:
Cisco ASA Firewall software Release 9.x.
●