Cisco Cisco ASA for Nexus 1000V Series Switch 문제 해결 가이드

Introduction
 Prerequisites
      Requirements
      Components Used
      Related Products
      Conventions
 Default Global Policy
 Enable Non−Default Application Inspection
 Verify
 Related Information

This document describes how to remove the default inspection from global policy for an application and how
to enable the inspection for a non−default application.

There are no specific requirements for this document.

The information in this document is based on the Cisco Adaptive Security Appliance (ASA) that runs the 7.x
software image.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

This configuration can also be used with the PIX Security Appliance that runs the 7.x software image.

Refer to Cisco Technical Tips Conventions for more information on document conventions.