Cisco Cisco ASA for Nexus 1000V Series Switch 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Download Software
Compatibility between ASA and ASDM
ASA Upgrade Path
Upgrade a ASA Software Image using ASDM 7.x
Upgrade ASDM Image using ASDM 7.x.
Upgrading the ASA and ASDM by downloading image directly from CCO
Upgrade a Software Image and ASDM Image using CLI
Verify
Troubleshoot
Related Information
Introduction
This document describes how to upgrade a software image on the Cisco ASA 5500 Series
Adaptive Security Appliances using the Cisco Adaptive Security Device Manager (ASDM).
Adaptive Security Appliances using the Cisco Adaptive Security Device Manager (ASDM).
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
Cisco ASA 5500 and ASA5500-X 9.1(2) and later
●
Cisco ASDM 7.1 and later
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
Related Products
This configuration can also be used with Cisco ASA 5500-X Series Security Appliance Software
Version 9.x.
Version 9.x.
Conventions
Download Software
You can download your required release version of ASA Software images and ASDM Software
images using these links:
images using these links:
●
customers only)
●