Cisco Cisco Industrial Wireless 3702 Access Point 설치 가이드
Step 8
Position the pole clamp bracket on the pole as needed before tightening the metal bands.
When the metal bands are tightened to the full tension, the pole clamp bracket cannot be adjusted unless the metal
bands are cut or disassembled.
bands are cut or disassembled.
Note
Step 9
Tighten the metal bands using the banding strap tool (BAND IT) (Cisco AIR-BAND-INST-TL=) by following the operating
instructions in the box with the tool. Ensure that the metal bands are as tight as possible.
instructions in the box with the tool. Ensure that the metal bands are as tight as possible.
Step 10
Place the mounting bracket onto the pole clamp bracket support bolt.
Step 11
Install four M8 x16 bolts (with flat and lock washers) into the bolt holes.
Figure 5: Mounting Bracket and Pole Clamp Bracket Assembly
Bolt holes
3
Pole clamp bracket assembly
1
Mounting bracket
4
Access point support bolt
2
15