Cisco Cisco Aironet 1530i Outdoor Access Point 데이터 시트

다운로드
페이지 5
 
 
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 
Page 2 of 5 
The following items are included with every model: 
● 
Access point 
● 
Grounding lug 
● 
DC power connector 
● 
One liquid-tight adapter for sealing the cable ingress connection 
● 
Sealant for the antenna connections 
● 
Antiseizing compound for the mounting brackets 
Network Connection 
The
 
Cisco Aironet 1530 Series access points can connect to the network wirelessly or through a wired Ethernet 
connection. 
● 
Wireless: An access point that connects to the network through another access point over a wireless 
backhaul is known as a mesh access point (MAP). The backhaul radio is built in, and no wired connection is 
needed for MAPs. An access point that acts as the gateway for mesh nodes is known as a root access point 
(RAP). RAPs connect to the network through a wired Ethernet connection. In these cases, a liquid-tight 
adapter is provided with the access point to seal the cable entry. 
● 
Ethernet: The Cisco Aironet 1530 Series supports 10/100/1000 Gigabit Ethernet using a shielded RJ-45 
connector with minimum Category 5 cable. Please see your local supplier for an outdoor-rated cable and 
shielded connectors. 
Power 
Table 2 provides the powering options for each model. 
Table 2. 
Powering Options for the Cisco Aironet 1530 Series 
Part Number 
AC 
DC 
Power over Ethernet (PoE) 
AIR-CAP1532I-x-K9 
AC/DC adapter 
24-57 VDC 
UPoE or PoE+(802.3at)
*
 
AIR-CAP1532E-x-K9 
AC/DC adapter 
24-57 VDC 
PoE+(802.3at) 
When the Cisco Aironet 1532I is powered using Enhanced PoE (PoE+) power, the access point will automatically disable one of 
the 2.4-GHz transmitters. 
AC Power 
To power the Cisco Aironet 1530 Series from an AC power source, an external AC/DC power adapter is required. 
When powering the Cisco Aironet 1530 Series from streetlight power, please note that the maximum voltage is 277 
VAC and requires the power adapter and the street light tap. Table 3 lists the power adapter and tap part numbers. 
Table 3. 
AC/DC Power Adapter and Streetlight Tap 
Part Number 
Description 
AIR-PWRADPT-1530= 
Power Adapter (AC/DC) - Outdoor AP1530 Series 
AIR-PWRADPT2-1530= 
Power Adapter (AC/DC) - Outdoor AP1530 Series, for Japan only 
AIR-PWR-ST-LT-R3P= 
Power cord, 4 ft, Streetlight Tap