Cisco Cisco 5760 Wireless LAN Controller 릴리즈 노트
27
Release Notes for Cisco 5760 Controller, Cisco IOS XE Release 3.2.xSE
OL-28114-04
Caveats
•
CSCud62982
When policers are attached to uplink interfaces using the range command, the policers do not
always work.
always work.
The workaround is to attach the policy to each port, one by one.
•
CSCud63110
In a hierarchical queueing policy, a table map under the child policy continues to mark traffic after
the policy is detached from an interface.
the policy is detached from an interface.
The workaround is to attach a default policy, for example:
policy-map trust-cos
class class-default
set cos cos table default
You then detach it.
•
CSCud63823
After a queuing policy is deleted from one uplink port (10 G), the queueing policy on the other 1-G
uplink stops working.
uplink stops working.
The workaround is to detach the policy and reattach it.
•
CSCud65034
When using hierarchical policies, the child classification does not work properly when its matching
value is a subset of the parent class's matching values for COS, DSCP, UP, and PREC classes.
value is a subset of the parent class's matching values for COS, DSCP, UP, and PREC classes.
The workaround is to configure hierarchical policies to achieve one of these results:
–
The parent class has only class-default and the child class has user-defined classes.
–
The parent class has user-defined classes and the child has only class-default.
•
CSCud69035
The management port on the device may stop working when it is connected to a Fast Ethernet port.
The workaround is to use the shutdown and no shutdown commands to clear and restart the
management port.
management port.
•
CSCud71747
The snmp get command on cLMobilityExtMoMcLinkStatus for a given mobility controller (MC)
and on cLMobilityExtMcAssocTime for a given mobility controller's client returns incorrect values.
and on cLMobilityExtMcAssocTime for a given mobility controller's client returns incorrect values.
The workaround is to use the following commands:
–
show wireless mobility oracle summary to display the link status between the mobility oracle
and the mobility controller
and the mobility controller
–
show wireless mobility controller client summary to display the client association time.
•
CSCud72626
After a per-VLAN policy is removed from a port, the policer stays active. The VLAN has an SVI
with a policy attached that is performing a set.
with a policy attached that is performing a set.
The workaround is to remove the policy from the SVI before removing it from the port.