Cisco Cisco Email Security Appliance C170 설치 가이드

The Cisco 170 series appliance performs autonomous environment monitoring to poll all external 
sensors and monitor operating conditions. In the event of damage to certain internal components or 
surpassed temperature thresholds, the system activates an alarm LED to notify you of a critical 
condition. For example, the alarm LED is activated by firmware in the event of various critical 
over-voltage and over-temperature conditions, as well as when the Cisco 170 series appliance has 
missing or unrecognized internal chip components. When the alarm LED lights, contact Cisco Technical 
Support to find out the cause of the problem. See the 

 for more information.

By default, the management interface is used to administer Cisco S170 and monitor Web Proxy (data) 
traffic. However, you can configure the management port for management use only. 

You may want to do this if your organization uses a separate management network. This can increase 
security by ensuring no proxy traffic can reach Cisco S170 on the management interface. 

When you use the management interface for management traffic only, you must configure at least one 
data interface for proxy traffic and define different routes for management and data traffic. 

For information about configuring and using the management port to set up and manage Cisco S170, see 
Cisco IronPort AsyncOS 7.5.0 User Guide for Web Security Appliances: 

.

Two hard disk drives (HDDs) in a RAID 1 configuration are pre-installed in the Cisco 170 series 
appliance. The HDDs are hot-swappable. For information on removing and replacing HDDs, see the 

RJ-45 ports

Indicates the Gigabit Ethernet customer data interfaces.

 

The port numbers are (from left to right) Data 1 and Data 2.

USB Ports

1

Indicates the two USB standard ports. 

Console port

Indicates the console port that directly connects a computer to the 
Cisco 170 series appliance.

1.

USB ports can be used in future software releases.