Cisco Cisco Email Security Appliance C170 사용자 가이드

Use the 

ping

 command in the CLI to test your paired interface by “pinging” an IP address on the same 

subnet as the NIC pair that has been confirmed to return a ping by an independent source.:

Issue a failover command (

etherconfig -> pairing -> failover

). Wait 15 seconds.

Use the 

ping

 command in the CLI to test your paired interface again with the backup NIC as the active 

interface.

Finally, return the NIC pair to its default state by issuing one more failover so that the primary interface 
is now active.

1. Pair 1:

        Primary (Data 1) Standby, Link is up

        Backup (Data 2) Active, Link is up

Choose the operation you want to perform:

- FAILOVER - Manually failover to other port.

- DELETE - Delete a pairing.

- STATUS - Refresh status.

[]>

Choose the operation you want to perform:

- MEDIA - View and edit ethernet media settings.

- PAIRING - View and configure NIC Pairing.

- VLAN - View and configure VLANs.

- LOOPBACK - View and configure Loopback.

- MTU - View and configure MTU.

[]>

mail3.example.com> ping x.x.x.x