Cisco Cisco Email Security Appliance X1070 사용자 가이드

In this example, a file named 

changed.config.xml

 is uploaded and the changes are committed: 

In this example, a new configuration file is pasted directly at the command line. (Remember to type 
Control-D on a blank line to end the paste command.) Then, the system setup wizard is used to change 
the default hostname, IP address, and default gateway information. (For more information, see 

.) Finally, the changes are committed. 

mail3.example.com> loadconfig

1. Paste via CLI

2. Load from file

[1]> 2

Enter the name of the file to import:

[]> changed.config.xml

Values have been loaded.

Be sure to run "commit" to make these settings active.

mail3.example.com> loadconfig

1. Paste via CLI

2. Load from file

[1]> 1

Paste the configuration file now. Press CTRL-D on a blank line when done.

[The configuration file is pasted until the end tag </config>. Control-D is entered on a 

Values have been loaded.

Be sure to run "commit" to make these settings active.

mail3.example.com> systemsetup