Philips DVD player DVP3500K DVP3500K/98 사용자 설명서

8

3

  Press 

 to select a language, and then press 

OK.

Turn on progressive scan

Note

To use the progressive scan feature, you must connect a 

 

•

progressive scan TV with the component video jacks (see 

“Connect” > “Connect audio/video cables” > “Option 1: 

Connect to the component video jacks” for details).

  

1

  Turn on the TV to the correct video input 

channel for this product.

2

  Press SETUP.

3

  Press   to select [Video Setup].

4

  Select [Progressive] > [On], and then press 

OK.

A warning message is displayed.

 

»

5

  To proceed, select [Ok] and then press OK.

The progressive setup is complete.

 

»

Note

If a blank/distorted screen is displayed, wait for 15 

 

•

seconds for the auto recovery.

If no picture is displayed, turn off the progressive scan 

 

•

mode as follows: 

1) Press   to open the disc compartment. 

2) Press the Numeric button ‘1’. 

6

  Press SETUP to exit the menu. 

7

  You can now turn on the progressive scan 

mode on the TV (see the TV user manual).

Note

During play, when the progressive scan mode is on for 

 

•

both this product and the TV, distorted picture may 

display. In this case, turn off the progressive scan feature 

on both this product and the TV.

4  Get started

Prepare the remote control

1

  Press and push the battery compartment to 

slide it open (see “1” in the illustration).

2

  Insert two AAA batteries with correct 

polarity (+/-) as indicated.

3

  Push and slide back the battery compartment 

(see “3” in the illustration).

 

Note

If you are not going to use the remote control for a long 

 

•

time, remove the batteries.

Do not mix batteries (old and new or carbon and 

 

•

alkaline, etc.).

Batteries contain chemical substances, so they should be 

 

•

disposed of properly. 

Find the TV input channel

1

  Press   to turn on this product.

2

  Turn on the TV and switch to the video input 

channel (refer to the TV user manual on how 

to select the A/V input channel).

Select menu display language

  

1

  Press SETUP.

 

»

[General Setup] menu is displayed.

2

  Select [OSD Language], and then press  .

EN

DVP3500K_98_EN_UM_V1.0.indd   8

2/21/2011   3:33:05 PM