Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

CSCsc83206—A nested repeater access point fails to notify radar detection

If radar is detected on a nested repeater in a nested repeater chain, no action is being taken by either 
the repeater or root/parent to notify the detection.

CSCse34644—Shared authentication with a non-native vlan does not operate properly

CSCsd69733—Hot standby access point cannot associate

The hot standby access point almost always fails to authenticate with the error cannot associate: Not 
standby parent (from incorrect mac address. The incorrect mac address is the mac address of another 
access point on the same network but not its parent device's mac address. In other words, the hot 
standby unit attempts to authenticate with an access point that is not it's parent and fails. 

These caveats are resolved in Cisco IOS Release 12.3(8)JEA3:

CSCdz55178—Router no longer crashes when a QoS profile name exceeds 32 characters 

CSCsj56438—Crafted EAP Response Identity packet no longer causes device to reload

CSCsj66692—Data integrity traceback no longer observed in voip/ccapi/ccapi_call.c 

CSCsj81502—Output of the show pagp neighbor command no longer truncates

If you need information about a specific caveat that does not appear in these release notes, you can use 
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:

(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not 
yet have a customer-visible description, or the defect might be marked Cisco Confidential.) 

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless 

from the menu on the left, and click Wireless LAN.

This section lists changes, errors, and omissions from user documentation for access points.

This section describes changes to access point and bridge documentation for this release.