Cisco Cisco Aironet 1250 Series Access Point 설치 가이드
20
78-17831-01
Assigning an IP Address Using the CLI
When you assign an IP address to the access point using the CLI, you must
assign the address to the BVI. Beginning in a privileged EXEC mode, follow
these steps to assign an IP address to the access point BVI using the console
port:
assign the address to the BVI. Beginning in a privileged EXEC mode, follow
these steps to assign an IP address to the access point BVI using the console
port:
Configuring Power
The access point receives power through the Ethernet cable or an external
power module. The following illustration shows the power options for the
access point.
power module. The following illustration shows the power options for the
access point.
Command
Purpose
Step 1
enable
Enter privileged EXEC mode.
Step 2
configure terminal
Enter global configuration mode.
Step 3
Interface bvi1
Enters interface configuration mode
for the BVI.
for the BVI.
Step 4
ip address address mask
Assigns an IP address and subnet mask
address to the BVI.
address to the BVI.
Step 5
end
Return to privileged EXEC mode.