Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

Use the Authenticator Configuration page to select the draft of the 802.1x protocol the access point 
should use. Follow these steps to set the draft for your access point:

Browse to the Authenticator Configuration page in the access point management system:

On the Summary Status page, click Setup.

On the Setup page, click Security.

On the Security Setup page, click Authentication Server.

Use the 802.1x Protocol Version (for EAP authentication) pull-down menu to select the draft of the 
802.1x protocol the access point radio should use. Menu options include:

Draft 7—No radio firmware versions compliant with Draft 7 have LEAP capability, so you 
should not need to select this setting.

Draft 8—Select this option if LEAP-enabled client devices that associate with this access point 
use radio firmware versions 4.13, 4.16, or 4.23.

Draft 10—This is the default setting. Select this option if client devices that associate with this 
access point use Microsoft Windows XP EAP authentication or if LEAP-enabled client devices 
that associate with this access point use radio firmware version 4.25 or later. The functionality 
in Draft 10 is equivalent to the functionality in Draft 11, the ratified draft of the 802.1x standard.

Click Apply or OK to apply the setting. The access point reboots.

1.

The functionality in Draft 10 is equivalent to the functionality in Draft 11, the 
ratified draft of the 802.1x standard.

PC/PCI cards 4.13

—

x

—

PC/PCI cards 4.16

—

x

—

PC/PCI cards 4.23

—

x

—

PC/PCI cards 4.25 and later

—

—

x

WGB34x/352 8.58

—

x

—

WGB34x/352 8.61 and later

—

—

x

AP34x/35x 11.05 and earlier

—

x

—

AP34x/35x 11.06 and later

2

2.

The default draft setting in access point firmware version 11.06 and later is 
Draft 10.

—

x

x

AP34x/35x 11.07 and later

—

x

x

AP12xx 11.40T and later

—

x

x