Cisco Cisco Aironet 1140 Access Point 디자인 가이드
26
Cisco 1140 Series Access Point Deployment Guide
OL-18384-01
Configuring Your Network for 11n
Confirming Packet Aggregation is Enabled
(Cisco Controller)> show 802.11a
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Disabling 5GHz UNII-2-Extended Channels
Given that the most recent allocation of spectrum in the 5GHz band was just introduced in mid-2007, a
number of Wi-Fi clients present in production environments do not actually support connections in the
UNII-2 Extended Band. This allotment of channels ranging from 100 to 140 is essentially invisible to
older Wi-Fi clients created before this band was made available for Wi-Fi by the FCC.
number of Wi-Fi clients present in production environments do not actually support connections in the
UNII-2 Extended Band. This allotment of channels ranging from 100 to 140 is essentially invisible to
older Wi-Fi clients created before this band was made available for Wi-Fi by the FCC.
Note
As of this writing, the list of clients which do not currently support this band include Cisco’s CB-21AG,
Intel’s 4965AGN, Intel’s 3945ABG, Intel’s 2915ABG and Apple MacBook Pros with an Atheros card.
Clients which do support this band include Apple’s iMac (with Broadcom 43xx-series wireless chipsets)
and Intel’s 5100/5300AGN adapters. Ensure that the latest drivers are installed to leverage these
channels. Please check with the vendor to ensure support.
Intel’s 4965AGN, Intel’s 3945ABG, Intel’s 2915ABG and Apple MacBook Pros with an Atheros card.
Clients which do support this band include Apple’s iMac (with Broadcom 43xx-series wireless chipsets)
and Intel’s 5100/5300AGN adapters. Ensure that the latest drivers are installed to leverage these
channels. Please check with the vendor to ensure support.
In order to ensure that RRM does not utilize any of the UNII-2 Extended channels for automatic channel
selection, navigate to ‘802.11a -> RRM -> DCA -> DCA Channel List’ and uncheck channels 100
through 140.
selection, navigate to ‘802.11a -> RRM -> DCA -> DCA Channel List’ and uncheck channels 100
through 140.
Figure 16
DCA Channel List