Cisco Cisco Aironet 1240 AG Access Point 설치 가이드
40
OL-16714-01
Using the Express Security Page
Follow these steps to create an SSID using the Express Security page:
1.
Type the SSID in the SSID entry field. The SSID can contain up to 32
alphanumeric characters.
alphanumeric characters.
Note
These characters are not allowed in the SSID: +, ], /, “, TAB,
and trailing SPACE.
and trailing SPACE.
2.
To broadcast the SSID in the access point beacon, check the Broadcast
SSID in Beacon check box.
SSID in Beacon check box.
Note
When you broadcast the SSID, devices that do not specify an
SSID can associate to the access point. This is a useful option
for an SSID used by guests or client devices in public space. If
you do not broadcast the SSID, client devices cannot associate
to the access point unless their SSID matches this SSID, so
only one SSID can be included in the access point beacon.
SSID can associate to the access point. This is a useful option
for an SSID used by guests or client devices in public space. If
you do not broadcast the SSID, client devices cannot associate
to the access point unless their SSID matches this SSID, so
only one SSID can be included in the access point beacon.
3.
(Optional) Check the Enable VLAN ID check box and enter a VLAN
number (1 through 4095) to assign the SSID to a VLAN. You cannot
assign an SSID to an existing VLAN.
number (1 through 4095) to assign the SSID to a VLAN. You cannot
assign an SSID to an existing VLAN.