Cisco Cisco Aironet 1600i Access Point 기술 참조
24
Cisco Aironet Series 1600/2600/3600 Access Point Deployment Guide, Release 7.5
Unique Installations
Figure 29
Mounting an AP onto an Electrical Conduit Box (ceiling T-Bar or conduit)
Ethernet Cable Recommendation
While the AP 1600/2600 and 3600 will work fine with CAT-5e for new cable installations, it is
recommended that customers use CAT6a as this is the cabling required by the 10GE standard.
recommended that customers use CAT6a as this is the cabling required by the 10GE standard.
Antenna Cable Recommendation
Whenever practical/possible, please keep antenna cable runs as short as possible. Cisco offers low loss
(LL) and ultralow loss (ULL) cables, which have the same characteristics as Times Microwave LMR-400
and LMR-600.
(LL) and ultralow loss (ULL) cables, which have the same characteristics as Times Microwave LMR-400
and LMR-600.
Cisco cables carry the part number AIR-CAB (Aironet Cable) and then a length. For example, a 20 Ft
length of LL cable with RP-TNC connector is Cisco AIR-CAB-020LL-R. These heavy black cables are
not Plenum rated and are primarily for outdoor use or manufacturing areas.
length of LL cable with RP-TNC connector is Cisco AIR-CAB-020LL-R. These heavy black cables are
not Plenum rated and are primarily for outdoor use or manufacturing areas.
Figure 30
When drilling holes for cable allow for size of connector (typically 5/8 inch) drill bit.