Cisco Cisco Aironet 1200 Access Point 설치 가이드
19
2.
Place the access point on a flat surface so that it is upright with the front
end facing you.
end facing you.
3.
Remove the 5-GHz radio access cover using the supplied T-10
tamper-resistant Torx L-wrench. See the following illustration.
tamper-resistant Torx L-wrench. See the following illustration.
Note
The following procedure use the integrated antenna radio module to
illustrate the removal and installation process. The procedure is
identical for the connectorized radio module.
illustrate the removal and installation process. The procedure is
identical for the connectorized radio module.
1
Access cover screws
2
Access cover
1
1
2
74632